Product Description
Precision type welding manipulator/welding column and boom NHCZ-1515 This machine set the switch interface aside peripheral equipment , can be composed and linkage with welding positioner , turning rolls and welding power , can achieve automatic welding for the girth and straight of the inside and the outside of the cylinder or other metal structure . (1)Welding manipulator are used for the inside and outside circumferential and longitudinal welding. (2)It mainly consists of column, boom, pedestal,ladder,electrical equipmet and hand control box. We also offer welding head and flux recovery system if customer require. (2)There are three types for you to choose. Fixed type, Fixed with rotation type, movable type. (3)Column can do both retracting (left and right) and lifting(up and down) movement to meet weld need. (4)The speed of retracting are adjusted by Frequency Conversion Speed Control(VFD). It is precise and stable. (5)Movable type cab be used with track together, to facilitate operation. (6)Column and boom are often used with welding rotator and positioner together. (as show in following picture) (7)Welding head and Flux recovery system are offered (8)Hand-control box is offered to facilitate operation (9)There is safty device. This welding manipulator can be used in match with automatic welder, welding rotator (roller stand) or welding positioner (turing table), and for the inside and outside circumferential and longitudinal welding. It is also applicable to automatic welding Model NHCZ-1515 Power Input 3ph 380V AC 50/60Hz Beam Lift Itinerary 1400mm Beam Stretch Itinerary 1300mm Beam Lift Speed 700mm/Min Beam Stretch Speed 200-1500mm/Min Beam Drive Mode Inverter Motor +Ball Screw Drive Head Level Fine-tuning Itinerary 100mm Head Vertical Fine-tuning Itinerary 100mm Head Adjustment Mode Electrically Adjust Control Mode Hand Control Box Control H*L* B Over Dimension H*L*B 2300*2200*620mm