Advantage of NHTR-6000 welding roller / welding rotator / welding turning roll :
1, Since the constant torch, frequency control motor, the pipe roller holds bigger capacity, low-speed stability much better.
2, Polyurethane wheel design increases the friction between wheel and work piece, standing the high temperature, fiction better and do not easy to skid.
3, Separation structure of the pipe roller is suitable for any length work piece.
4, The position of the wheel can be adjustable to fit the larger range of work pieces. (Max. Range: Ø 160mm---Ø 4000mm)
5, Do not need any tool to remove the position of wheel, just put the wheel symmetrically into the relative groove, so easy and simple to operate and even save your value time and labor.
6, Adopting the foot pedal control the on/off of the pipe roller for weldingl. You can also choose the NHFC-10 speed foot pedal, which could control the on/off, but also the rotation speed. Realizing the one key regulation, easy operation.
7, The whole pipe roller adopts the welding design structure, holding the advantage of compact structure and high Rigid, convenient to install and remove, very sui
Table for the different working place.
welding roller / welding rotator / welding turning roll
| Model |
NHTR-3000 |
| Power Input |
1Phase,AC220V,50/60Hz |
| Turning Capacity |
3000kg |
| Load Capacity |
3000kg |
| Speed Range |
80-1600mm/min |
| Diameter Range |
Φ40-1400mm |
| Drive Motor |
AC220V/ 200W |
| Roller Type |
NH,50MM(W)*200MM(Φ) |
| Dimension |
(Drive):800*370*360mm
(Idler):800*260*360mm |
| Net Weight |
Drive120kg,Idler80kg |
Audited Supplier 
){kind=link}